Sep
08

Preserving history

The history of an object tells many stories. Devin Mattlin explains how the painstaking task of conserving a single stock certificate resonates in the tragic history of the World Trade Center.

The history behind a single object can often tell many stories. In 2004 the museum acquired a stock certificate from an early Internet start-up. At first glance, you can probably imagine the types of stories we might tell with this object. However, when context places it in the World Trade Center on September 11, 2001, this stock certificate’s history becomes much more complex.

Donated by Hoover, Inc., to the museum’s Division of Work and Industry, the stock certificate is a reminder that the World Trade Center was a target, symbolically representing America’s economic might and reach. The stock certificate is also a piece of reality, as fragments of paper rained down all across the city of New York following the collapse of the World Trade Towers.

Congress designated the museum as the official repository of the story of September 11, and the museum continues to collect artifacts that reflect what happened that day and the aftermath. How do you preserve the history of an object—especially a tragic history—and how does that history inform the conservation treatment the object receives in preparing it for potential display?

While the answers very much depend on the object in question, making this particular stock certificate’s tumultuous history immediately obvious to the viewer is especially important. The certificate arrived in the Paper Conservation Lab as a pile of paper bits stored in the envelope and inert plastic sleeve shown below. Organization of these fragments was needed to make some order out of the chaos, to make the story of the certificate clear, and to provide a safer permanent storage solution.

Plastic bag with paper fragments

The envelope where the certificate’s broken fragments were stored previously. (Photo by Devin Mattlin)

To achieve these objectives, the fragments were categorized by charred paper color, ink lines, and shape to make the original size of certificate clear. Once staff members knew how to put it together, the intentional decision was made to place the pieces slightly apart—not fitting together quite perfectly—thus maintaining their history in demonstrating the destruction the attacks caused. This was accomplished by using something called solvent-set tissue paper. The tissue is coated with an adhesive that is not tacky at room temperature, but can be activated with ethanol. This allowed for the pieces to be placed in desired positions, secured with ethanol applied with a miniature paint brush, and then weighted down while the softened adhesive set to establish a strong connection. This process made organization and workability easier, as secured fragments wouldn’t move around while adjusting others. The fragments can be seen on the tissue in the photos below.

Certifacate with weights on it

Fragments being weighted down while ethanol evaporates. (Photo by Devin Mattlin)

stock certificate

The stock certificate with all the fragments from the envelope placed on the solvent-set tissue. It may be hard to tell by looking at the document but the certificate is for 6,000 shares with a par value of $.0001 per share. It is dated May 31, 1999. (Photo by Devin Mattlin)

Next, MicroChamber paper, an alkaline paper infused with zeolites, was placed behind the solvent-set tissue. Zeolites are compounds that act as molecular sieves, removing and neutralizing acids, pollutants, and volatiles (compounds that can vaporize easily). Even this many years after the attacks of September 11, 2001, vapors from smoke damage may still come off the certificate, which can be harmful to the object. These layers of paper were then encapsulated with the inert plastic Mylar, sealed to itself at the edges. Encapsulation secures all the pieces together and will keep the document safe while it is in storage, ensuring dust and water cannot reach it. Due to paper’s sensitivity to light, this document will likely spend a lot of time off display but, even in storage where light exposure is low, protection and stabilization are important. This entire treatment is readily reversible, meaning future generations of conservators could safely get it back to its original condition if the need arose.

damaged stock certificate

Certificate on solvent set tissue with MicroChamber paper behind it. (Photo by Devin Mattlin)

Damaged stock certificates

Treated stock certificate encapsulated with Mylar. (Photo by Devin Mattlin)

The intent of conservation is not to make an object appear new again but to care for the object while upholding its history—which, in this case, includes the visible damage to the object. It can be easy for conservation work to become a standardized routine of cleaning and repairing to stabilize an object. But it is important to remember to step back and think about an object’s specific story and setting in order to develop an appropriate and safe conservation, storage, and display plan that will allow a sometimes tragic story and damage to be preserved.

This post by Devin Mattlin, a 2017 summer intern in the Paper Conservation Lab, was originally published by the American History Museum’s blog, “O Say Can You See?”.


Posted: 8 September 2017
About the Author:

The Torch relies on contributions from the entire Smithsonian community.

What do you think?

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>